MadTest D4i1 Multi-Function Test Adapter

D4i1 Multi-Function Test Adapter

The D4i1 is for DS/DS2 and Cutler Hammer retrofitted trip units. This is a multi-function adapter to be used with a 140D481G03 Base Unit DS Current Test set. The adapter is a replacement for the OEM 877C02G03 adapter shown right. The adapter was designed as a replacement of, and PRTAAPM 32VDC DS power supply in addition the unit supports 120VAC for the 140D481G03 OEM base unit (not supplied). The D4i1 stands for DS/DSII trip units, and Retrofitted RMS DS trip units. These additional functions plus the 32VDC and 120VAC are 4 in 1 one adapter and quality craftsmanship will provide years of reliable service.

Specifications.

For Westinghouse, Cutler Hammer/Eaton, and Eaton Trip Units.

Tests DS/DSII Trip units (OEM YES)
Tests Magnum DS Trip Units (OEM YES)
Test DS Retrofitted Trip Units (OEM NO)
2 Pin 32VDC Trip Unit Power (OEM NO)
120VAC suppled for Base unit. (OEM NO)
Comes standard with GZ2i1

The D41i reorder part numbers listed below;

1-D4i1 BASE UNIT PART # DMR-0030
1-DS/DSII CABLE HARNESS PART # DMR-0023
1-DIGTRIP RETROFIT HARNESS PART # DMR-0027
1-DIGITRIP 2 PIN CABLE HARNESS PART # DMR-0022
1-120V CABLE PART # DMR-0021
1-PELICAN CASE 1520 PART # DMR-0020 (DMS4i1)
1-NANUK 926 CASE PART # DMR-0031 (D4i1)
1-ZONE INTERLOCK /GROUND DEFEAT PLUG PART # GZ2i1
1-D4i1 HARD COPY MANUAL PART # DMR-0032
7-DMR5i1 BANANA PLUG TO FORK EXTENTIONS PART # DMR-0028 (DMR5i1)(D4i1)

NOTE

This limited functions test kit and not able to perform the same tests of the MadTest DMR5i1. This adapter cannot be upgraded.